No Products in the Cart
Last few remaining.
PLACTIVE AN1 is an innovative Nanocomposite developed with a
high quality PLA and a patented, scientifically validated and highly
effective Nano-Copper additive.
PRINTING TEMP. 190 - 210 °C
PRINTING SPEED 40 - 50 MM/SEG
LAYER HEIGHT 0.1 MM
PRINT BED TEMP. ± 0 - 60 °C
| Physical Properties | PLACTIVE TM | ASIM Method |
| Specific Gravity, g/cc | 1.24 | D792 |
| MFR, g/10 min(2) | 6 | D1238 |
| Relative Viscosity(3) | 4 | D5225 |
| Clarity | Transparent | - |
| Peak Melt Temperature, °C | 145-160 | D3418 |
| Glass Transition Temperature, °C | 55-60 | D3418 |
| Mechanical Property | ||
| Tensile Yield Strength, psi (MPa) | 8700 (60) | D882 |
| Tensile Strength at Break, psi (MPa) | 7700 (53) | D882 |
| Tensile Modulus, psi (MPa) | 524,000 (3.6) | D882 |
| Tensile Elongation, % | 6 | D882 |
| Notched Izod Impact, ft-lb/in (J/m) | 0.3 (16) | D256 |
| Flexural Strength, psi (MPa) | 12,000 (83) | D790 |
| Flexural Modulus, psi (MPa) | 555,000 (3.8) | D790 |
| Heat Distortion Temperature, °C 66 psi (0.45 MPa) | 55 | E2092 |
