Fast Print Settings
print temp: 220 °C ± 10 °C
print speed: 120 150 mm/s
fill density : 20%
bed adhesion: Clean glass
fan speed: 100%
top thickness: 1.2 mm
layer height: 0.1 mm
bed temp: 60 °C or non-heated bed with tape/glue
Strong Settings
print temp: 220 °C ± 10 °C
print speed: 40 70 mm/s
fill density : 20% (higher = stronger)
bed adhesion: Clean glass
fan speed: 0%
top thickness: 1.2 mm (thicker = stronger)
layer height: ‚¬°¤ 0.06 mm (smaller = stronger)
bed temp: 60 °C or non-heated bed with tape/glue
